Low cost miniquad racing drone build video PART 1

Channel: RCModelReviews

401,723

TIP: Right-click and select "Save link as.." to download video

Initializing link download... Initializing link download.....

In part 1 of the low-cost racing miniquad drone build video I look at the "bill of materials" needed to construct your own FPV racing mini quadcopter based on the ZMR250 frame.

Materials:

- the ZMR250 frame fiberglass version
http://www.banggood.com/ZMR250-H250-250mm-Fiberglass-Mini-Quadcopter-Multicopter-Frame-Kit-p-933189.html

or carbon version:
http://www.banggood.com/H250-ZMR250-250mm-Carbon-Fiber-Mini-Quadcopter-Multicopter-Frame-Kit-p-933185.html

- DYS BE1806/2300KV motors from Banggood:
http://www.banggood.com/DYS-BE1806-2300KV-Brushless-Motor-2-3S-for-Mini-Multicopters-p-933192.html

or from HobbyKing:
http://hobbyking.com/hobbyking/store/__61433__DYS_BE1806_13_Brushless_Motor_for_Multirotor_2300KV_24g.html

- HobbyKing Afro 12A ESC
http://hobbyking.com/hobbyking/store/__55241__Afro_ESC_12Amp_Ultra_Lite_Multi_rotor_Motor_Speed_Controller_SimonK_Firmware_Version_3.html

- Gemfan 5x3 propellers from Banggood
http://www.banggood.com/Gemfan-5x3-Inch-Plastic-5030-Propeller-CWCCW-For-240-250-Frame-p-937866.html

or HobbyKing:
http://hobbyking.com/hobbyking/store/__58252__Gemfan_5030_Multirotor_Propellers_One_Pair_CW_CCW_Green_.html

- Naze32 flight controller (unsoldered)
http://hobbyking.com/hobbyking/store/__55819__AfroFlight_Naze32_Acro_AbuseMark_FunFly_Controller.html

or pre-soldered:
http://hobbyking.com/hobbyking/store/__68813__AfroFlight_Naze32_Acro_AbuseMark_FunFly_Controller_Soldered_version_Horizontal_Pin_.html

- 600TVL SuperHAD II FPV camera with WDR from Surveilzone:
http://www.surveilzone.com/fpv/fpv-camera/sony-super-had-ccd-600tvl-fpv-ir-block-camera-2.8mm-lens

or from SecurityCamera2000
http://www.securitycamera2000.com/products/600TVL-SONY-SUPER-HAD-CCD-D%252dWDR-Color-Board-Camera-with-OSD-Menu-DNR.html


(Note: I will update this list shortly with more components and sources so don't order just yet)