Readymade RC Anaconda PNP w/tbs crossfire

Channel: Dans RC Workbench

3,781

TIP: Right-click and select "Save link as.." to download video

Initializing link download... Initializing link download.....

This was an LOS flight test of the air frame as well as the TBS Crossfire system. Air frame didnt pass

Testing my Anaconda from Readymade RC. Seems under powered but I am going to change the prop. If my calculations are correct I will pick up 1LB more thrust will no difference in AMP draw.

It flew well just seemed to lag in the air with no extra power.

Setup:
Anaconda PNP with 3520/800KV motor / 80a ESC
Spektrum DX9
TBS Crossfire TX/RX
Immersion RC EzOSD
Guardian 2d/3d Gyro
15x4 Prop (Changing to 13x6.5)
Mobius Flight Camera
Immersion RC 660MW VTX
2 - 4s / 8000Mah 10c batts (16000mah total) May move down to 12000 mah