Homemade Mini Bandsaw

Channel: Doege Dynamism

432,015

TIP: Right-click and select "Save link as.." to download video

Initializing link download... Initializing link download.....

This is a little project I made in my spare time over the summer while taking classes at Michigan Technological University. It was inspired by a wooden bandsaw I saw on woodgears.ca and is a little mini bandsaw that uses portable bandsaw blades and is powered by an AC capacitor start electric motor that I found in a dumpster behind the Mechanical Engineering-Engineering Mechanics building. The capacitor burned out, so I have to hand crank it to get it past the starting torque and up and running. I spent less than 10$ on this project and it works quite well, about 5$ for a blade and 3$ for a pipe and pipe floor flange to mount the drive crowned pulley and v-belt pulley to. The rest of the materials were scavenged from random places. The saw has three small wooden crowned pulleys that the blade tracks on, the top one moves up and down, for tensioning, in a slot, and the bottom, driven pulley, is pinned to the pipe shaft with a drywall screw. A pipe floor flange screws onto the end of the drive shaft and allows me to mount different size pulleys to be driven by the motor. In this video, I start her up and make two quick cuts, one through a piece of plywood and another through a piece of aluminum. The blade is a 24 tpi metal cutting blade. I only had money for one blade and wanted to be able to cut thin metal, so I figured a metal cutting blade would work well enough for most materials. I will be improving the design soon. The main problems being the unbalance of the v-belt pulley, the flange isn't true, and the size of the pulley blocking the table. The bolts also start to come loose as can be seen by the duct tape on the ends of some, but this shouldn't be a difficult fix. First I must repair the motor though, as she recently shorted out.
Enjoy and build your own!
NOTE: Building machines is extremely dangerous and can easily maim or kill if done by unskilled hands, I do not use this machine, it was a proof of concept, not for regular use.