run a 220 Volt light bulb on a 9 Volt battery - win or fail?

Channel: LifeHack2012

845,707

TIP: Right-click and select "Save link as.." to download video

Initializing link download... Initializing link download.....

My "run a energy safing bulb on 1 battery and a 2 transistor inverter" experiment was a bit of a failure. It did blink but I guess 9 Volt wasn't enough to make it work.

For this project, I used one inverter transformer and a CCFL (cold-cathode fluorescent lamp) from an old LCD monitor.

The 2 transistors are NPN, type BD737 from a (very old) old cassette player.
The 2 resistors are 82 Ohm (grey-red-black) and 1/4th Watt.
I think almost any NPN transistor in this package should do the job.
It has a BCE pin-out.

On a full 9 volt battery, I got around 750Volt but the battery was draining fast.

For the schematic diagram I used this one:
http://www.eleccircuit.com/wp-content/uploads/2007/06/micro-inverter-by-2n5121.jpg