Baileigh Industrial RDB-175 Hydraulic Tube Bender
Channel: Baileigh Industrial Ltd
TIP: Right-click and select "Save link as.." to download video
Initializing link download.....
The new RDB-175 has a digital controller where you can set the bend angle and the machine will stop at this angle, previously this was an analogue system.
The RDB-175 has the capacity to bend the following;
-2.5" (63.5mm) mild steel tube
-60mm stainless steel tube
-2" (50.8mm) mild steel square tube
-1.25" (32mm) solid mild steel bar
-Min CLR 12mm
-Max CLR 228mm
-Min OD 6mm
-0-180 degrees in 12 secs (depending on material strength)
-Auto stop bend angle with DRO
-Foot pedal operated
-Quick change counter die mount
-Made in the USA
-240V, 50Hz Single phase 16 amps.