DIY Holograph How to build a hologram projector at home for cheap

Channel: Jeramie Hoover


TIP: Right-click and select "Save link as.." to download video

Initializing link download... Initializing link download.....

In this tutorial video I will show you how to build your very own hologram projector for your cell phone. The total cost, not counting the phone is only $3.00 U.S. A 5" x 7" picture frame (for the glass) A 5" x 7" locker mirror and a roll of duct tape. All three items can be found at the 99 cent only store. All that's left for materials is the cardboard. Any rigid cardboard box will do, as long as it's big enough to cut all of your pieces out of. First cut your cardboard into a strip about 18 inches long and 8 inches wide. Next cut 2 pieces of cardboard 2 inches wide by 4 and a quarter inches. Next mark 5 and a half inches in from the top and bottom in the space between the two lines you just drew, center your glass and trace around it. Inside the rectangle you just traced center your phone and trace it. Mark lines up and down at the ends of your phone tracing. Now mark two lines each a half inch in from your top and bottom lines from the glass and cut out the piece that you just marked. On one of the two end sections center your phone and trace a line around it. Now mark lines inside of that just larger than the screen on your phone. This way the screen can be seen through the hole without the phone falling through. Fold on the first two lines you drew. Next tape your glass over the hole that you cut in the middle of your cardboard. Only tape the edges so that you can still see through the glass. Fold into a Z shape with the middle at a 45 degree angle. Tape the two smaller pieces of cardboard to either side so that it holds the Z shape. Finally, on your phone go to YouTube and search for "Hologram Ready Videos" or use this link for the video I used, from YouTube user
play the video in wide screen and place face down over the hole in the top of your projector and there you have it.