Tilting Trike - testing video (Final year college project)

Channel: NISHANT AGARWAL

381,179

TIP: Right-click and select "Save link as.." to download video

Initializing link download... Initializing link download.....

A two-wheeled vehicle such as bicycle and motorcycle tilt in the turn to counter the centrifugal forces acting on the vehicle, while other vehicles including three wheelers, motorcar, and quad bike rolls slightly out of the turn. This increases the load on outer wheels and limits the velocity of turning of the vehicle.

The goal of this project is to design and fabricate a three-wheeled vehicle consisting of one front wheel and two rear wheels also called as the delta tricycle. Tilting a vehicle can provide many performances and design advantages including greater stability while turning, reduced load transfer to outer wheels as well as reduced probability of rollover while taking a turn. A tilting tricycle tilts towards the center of curvature of the turn while retaining a vertical position when going straight. The tilting effect is actuated with the help of suspension springs mounted on rear wheels supported by respective wheel arms of the delta tricycle. This tilting action of tricycle results in achieving higher velocity while turning in comparison to rigid frame tricycle. Moreover with a shift in the centre of gravity towards the centre of the turn, while tilting, the radius of turning is reduced with greater stability of the vehicle.

After conducting a study of various tricycles and recumbent tricycles present and going through their pros and cons the final conclusion is extracted to design and fabricate a tricycle that offers ease in the ride, ergonomic comfort and of future importance. The final tilting trike consists of designing of the main chassis for carrying a driver supported by three wheels mounted on the same chassis, the subframe supports the two rear wheels that can lean or tilt with respect to steering. The design of the vehicle is prepared using CAD modeling software Solidworks2013 and static force analysis is done using FEA software ANSYS14.5.

*contents of the video can not be copied or distributed in any sense.