The Time Machine: A Homemade Gaming Seat

Channel: Andy Mayer

46,819

TIP: Right-click and select "Save link as.." to download video

Initializing link download... Initializing link download.....

"The Time Machine" is a homemade gaming seat built from 50mm PVC pressure pipes.

The following parts were used in the building process (links to Amazon.de where available):
8x PVC 50mm pressure pipe 1m http://www.amazon.de/dp/B005HDK41U
18x 90° angle segment http://www.amazon.de/dp/B005HCOMDW
6x 45° angle segment http://www.amazon.de/dp/B003Y7AKTM
28x T-segment http://www.amazon.de/dp/B005HDINLI
2x pieces of wood 110mm x 40mm x 500mm
8x 50mm clamps
3x cans of black spraypaint
1x saw
1x box of sandpaper
1x measuring tape
1x pencil
1x Pattex 100% All-Purpose glue 100g
8x SPAX screws
1x phillips head screwdriver
1x pack of zip ties, black, 400mm
1x used car seat
1x seat cover from Amazon http://www.amazon.de/dp/B00JFMI3AS

The measurements are as follows:
Total length: 135cm
Total width (no arms): 55cm
Total width (including arms): 116cm
Total height (without seat and camera pipe): 64cm
Total height (including camera pipe): 125cm

You can find a picture with all the separate measurements added to it in this imgur album:
http://imgur.com/a/Fwy0r

I took inspiration from this build: https://www.reddit.com/r/oculus/comments/2bl9td/370aud_later_and_im_dk2ready_bring_it_on/ which in turn was based on this build: http://www.isrtv.com/forums/topic/681-simul8r-mark-ii-pvc-plans-bottom-of-pg-7-donations-accepted/?page=1